BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
Item# TR-13160
Proactive Environmental Products®
PRO 100 SOLAR CHARGER #1
Maximize Your Solar Power!
Set it and Forget it!
Weatherproof PRO 100 Solar Charger #1 Delivers Autonomous Pump Control with Proactive® Liquid Detection Sensor (LD), Multiple Settings Timer, and Tank Float Switch Technologies
SOLAR CHARGER
BREAKERS
PRO LD WITH BOOSTER
LIQUID DETECTION SENSOR PROBE
INTERNAL
FUSE #1
TIMER
DRY
SENSOR PROBE
EXTERNAL FLOAT
The Pro 100 Solar Charger #1 is compatible with the
Proactive Environmental Products® pumps listed below:
12 Volt Poseidon® 100 Plastic Pump
12 Volt Frontier® 100 Plastic Pump
12 Volt Mini-Monsoon® XL 100 Stainless Steel Pump
If you plan to power the Proactive® brand pumps listed above with other means of energy, please contact us to discuss the full line of Proactive® Autonomous Pump Control System options for: Solar Direct, 110/220 AC to 12 volt DC output, 12 volt DC battery / 12 volt DC battery bank, or gas generator. For your convenience, videos referencing Selecting Power and Autonomous Setup are available on our website for the pumps listed above.
Applications of the PRO 100 Solar Charger #1: When using the Poseidon® 100 and SS Mini Monsoon® XL 100 series pump lines include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Groundwater and Surface Water Monitoring
Applications of the PRO 100 Solar Charger #1: When using the SS Mini Monsoon® XL 100 series pump line include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Groundwater and Surface Water Monitoring, Hydrocarbon Recovery [LNAPL/DNAPL]
Applications of the PRO 100 Solar Charger #1: When using the Frontier® 100 series pump line:
Stationed application for cabin use
Pro 100 Solar Charger #1 provides flexible product features. If you appreciate options (the good news all options are included with the product), you will be pleased to know you can select from any or all of the Pro 100 Solar Charger #1 features!
​
Option #1: LD Sensor Detection and Dry Run Detection Feature
The LD sensor detects (conductive) liquid*. The pump will run as long as the LD sensor is suspended in liquid. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Pro 100 Solar Charger #1 to shut-off the pump. As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Pro 100 Solar Charger #1 to turn-on the pump. This pumping cycle occurs automatically.
Option #2: Tank Float Switch Feature
This feature prevents tank over-fill and provides control over the desired total volume of liquid that enters the tank. The tank float switch transmits a signal to the Pro 100 Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment). The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Pro 100 Solar Charger #1 to turn-on the pump again. This pumping cycle occurs automatically.
Option #3: Multiple Settings Timer Feature
The Pro 100 Solar Charger #1 timer provides up to 19 pumping cycles within a 24 hour period, delivering total autonomous pump run times and control over pump run time duration. This pumping cycle occurs automatically.
Option #4: Incorporate All Autonomous Features
Incorporating the Pro 100 Solar Charger #1 LD and Dry Run Detection Sensors, Tank Float Switch, and Multiple Interval Timer Settings provides the ultimate experience in autonomous pump control available!
Absolute Pump Control ~ you're going to love the way you work!
PRO 100 Solar Charger #1
The Ultimate Pump Control With Liquid Detection Sensor Technology
Configure The PRO 100 Solar Charger #1 The Way You Want It!
Benefits:
Proactive® Intelligent 80 Amp Solar Charger
-
Ideal for off-the-grid projects
-
Ideal for remote sites
-
Designed for the Proactive® 100 series pump line
-
Incorporated into the most economical, intuitive, and simple to use solar powered autonomous pump control on the market
-
Improves time management! Literally set the Proactive® 80 amp Solar Charger and autonomous settings with pump and forget it
-
Saves money by eliminating archaic, bulky, and expensive equipment
-
Reduces carbon footprints
Benefits:
Proactive® LD and Dry Run Sensor Autonomous Pump Control
-
Use of the LD with Dry Run autonomous pump control sensors manages pump operation so you don’t have to
-
Reliable LD Sensor runs the pump only when liquid is present*
-
Same pump flow rate recognition through autonomous pumping cycles
-
Flexibility to choose the autonomous options that will get the job done accurately, faster, and under budget
-
Additional and customized LD and Dry Run Sensor wire length is available upon request at time of order
-
User-friendly, one time simple setup
-
Look like a PRO when your clients see how much money you save them by deploying Pro 100 Solar Charger #1 with Proactive® Autonomous Pump Control Technologies
Benefits:
Proactive® Tank Float Switch Autonomous Pump Control
-
Ideal pump management when transferring liquid to a tank
-
Prevents tank over-fill
-
Provides control over the desired total volume of liquid that enters the tank
-
Same pump flow rate recognition through autonomous pumping cycles
-
Provides peace of mind knowing that the tank float switch will mind the pumping operation so you don't have to
-
User-friendly, one time simple setup
-
Look like a PRO when your clients see how much money you save them by deploying Pro 100 Solar Charger #1 with Proactive® Autonomous Pump Control Technologies
Benefits:
Proactive® 38 Multiple Settings Timer Autonomous Pump Control
-
Provides ultimate pump management!
-
Using the timer settings feature controls the pump run times and duration of pump run time
-
Offers up to 19 reliable pumping cycles within a 24 hour period
-
Proven to be most effective for autonomous pump control when coupled with Proactive® LD Sensor technology
-
Same pump flow rate recognition through each autonomous pumping cycle
-
Controlled pumping cycles may extend pump life
-
User-friendly, one time simple setup
-
Look like a PRO when your clients see how much money you save them by deploying Pro 100 Solar Charger #1 with Proactive® Autonomous Pump Control Technologies
Benefits:
Proactive® Booster
-
Ideal for short and long term groundwater purge and pump tests
-
Improves time efficiency
-
Plug and Play Booster - No setup required
-
Economical purging solution
-
Same pump flow rate recognition through each autonomous pumping cycle
-
Save money! Eliminate archaic, bulky & expensive equipment
Features:
Proactive® Intelligent 80 Amp Solar Charger
-
Proactive® Solar charger handles up to 80 amps input allowing for a large solar panel array
-
Intelligent Proactive® 80 Amp Solar Charger identifies and auto adjusts to 12 or 24 volt solar panels (this means you do not need a 24 to 12 volt step down unit!)
-
Easy-to-read LCD Display
-
User-friendly operation interface
-
State-of-the-art Pulse Width Modulation (PWM) incorporated, providing reliable, effective, and consistent charging
-
Intelligent battery reverse discharge protection
-
Intelligent battery reverse polarity protection
-
Low Voltage Disconnect (LVD) battery protection
-
Intelligent overload feature with short circuit protection
-
Intelligent automatic temperature compensation
-
Provides consistent amp and 12 volt DC output to the pump for consistent flow rate
-
User-friendly, one time simple setup
-
Incorporated into weatherproof enclosure
Features:
Proactive® LD and Dry Run Sensor Autonomous Pump Control
-
Provides autonomous pump management
-
The pump will run as long as the LD sensor is suspended in liquid*. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Pro 100 Solar Charger #1 to shut-off the pump
-
As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Pro 100 Solar Charger #1 to turn-on the pump
-
This pumping cycle occurs automatically
-
Same pump flow rate recognition through each autonomous pumping cycle
-
Purposefully sleek and narrow LD and Dry Run Sensor wires and probes designed to accommodate both the pump and sensors in 2” and larger diameters wells
-
LD Sensor probes also serve as wire weights
-
User-friendly, one time simple setup
Features:
Proactive® Tank Float Switch Autonomous Pump Control
-
Provides tank overfill protection
-
The tank float switch transmits a signal to the Pro 100 Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment)
-
The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Pro 100 Solar Charger #1 to turn-on the pump
-
This pumping cycle occurs automatically
-
Same pump flow rate recognition through each autonomous pumping cycle
-
Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology
-
Can be deployed in tank or vault long distances from power supply with added wire
-
Tank float switch comes with 3 feet of wire. Additional wire is available (sold by the foot upon time of order)
-
User-friendly, one time simple setup
Features:
Proactive® 38 Multiple Settings Timer Autonomous Pump Control
-
Sophisticated yet easy to program timer provides 19 reliable pumping cycle settings within a 24 hour period
-
Delivers control over the duration of pump run time per pumping cycle
-
The pumping cycles occurs automatically
-
Same pump flow rate recognition through each autonomous pumping cycle
-
Controlled pumping cycles may extend pump life
-
Using the multiple settings timer feature may reduce well stress
-
Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology
-
Easy to read LCD lit display
-
User-friendly, one time simple setup
Features:
Proactive® Booster
-
The internal booster is required for use with Proactive® 100 series pump lines
-
Constant Voltage Boosting Technology (CVBT) is built into all Proactive® power boosters providing the correct voltage to reach the pump motor for consistent flow rate
-
Low Voltage Disconnect (LVD) is incorporated into all Proactive® power boosters. LVD protects the battery from going into critical level discharge
-
The booster recognizes the same pump flow rate through each autonomous pumping cycle
Pro 100 Solar Charger #1 comes with:
-
Weatherproof enclosure providing long life and protection to the components
-
80 amp Solar Charger
-
Built-in Proactive® Booster
-
Built-in Multiple Settings Timer
-
Built-in 30 amp breakers
-
Liquid Detection Sensor and Dry Run Sensor probes come with:
â—‹ 150 feet of wire per sensor spooled onto reel for 100 Series Pump Line
-
Tank Float Switch comes with 3 feet wire (additional wire can be purchased upon request at time of order)
-
Tamper-Proof lock for peace-of-mind
-
Mounting Brackets
-
Warranty: Manufacturer 6 months parts and labor warranty
Specifications:
DC VOLT RECOMMENDATION: 12-24V
MAXIMUM AMP OUTPUT: 25 AMPS
MAXIMUM AMP INPUT: 80 AMPS
DEPTH MEASUREMENT: 8"
WIDTH MEASUREMENT: 17"
HEIGHT MEASUREMENT: 21"
WEIGHT: 19 POUNDS
INTERNAL FUSE: 25 AMP
BREAKERS: 30 AMP
ENCLOSURE RATED: WEATHERPROOF
​
Note: Product dimensions are inclusive of the Pro 100 Solar Charger #1 NOT inclusive of the sensors, reels, or tank float switch.
​​
* Liquid must contain minerals in order to use the LD sensor