top of page

Proactive Environmental Products®

ABYSS SOLAR CHARGER #1

 

Maximize Your Solar Power!

 

Set it and Forget it!

Weatherproof Abyss Solar Charger #1 Delivers Autonomous Pump Control with Proactive® Liquid Detection Sensor (LD), Multiple Settings Timer, and Tank Float Switch Technologies  Includes a Booster to Double the Pump Purge Rate

 

 

 

 

 

 

 

 

 

 

                

 

      

 

 

 

The Abyss Solar Charger #1 is compatible with the

Proactive Environmental Products® pumps listed below:

​

Abyss® and Abyss® Slimline pumps

 

If you plan to power the Proactive® brand pumps listed above with other means of energy, please contact us to discuss the full line of Proactive® Autonomous Pump Control System options for: Solar Direct, 110/220 AC to 12 volt DC output, 12 volt DC battery / 12 volt DC battery bank, or gas generator. For your convenience, videos referencing Selecting Power and Autonomous Setup are available on our website for the pumps listed above.

 

Applications of the Abyss Solar Charger #1: When using the Abyss® and Abyss® Slimline pumps include, but not limited to: 24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Groundwater and Surface Water Monitoring, Hydrocarbon Recovery [LNAPL/DNAPL]

Purge & low flow sample as low as

10mLs per minute 

Item# TR-14080

Abyss Transformer #4

SOLAR CHARGER

INTERNAL FUSE #1

BREAKER

BREAKER

TIMER

ABYSS BOOSTER

DRY

SENSOR PROBE

LIQUID DETECTION SENSOR PROBE

TANK FLOAT SWITCH

GREY

TERMINAL BAR

Abyss Solar Charger #1  

The Ultimate Solar Powered Pump Control with Liquid Detection Sensor Technology

Configure the Abyss Solar Charger #1 the Way You Want It!

Abyss Solar Charger #1 provides flexible product features. If you appreciate options (the good news all options are included with the product), you will be pleased to know you can select from any or all of the Abyss Solar Charger #1 features!

​

Option #1: LD Sensor Detection and Dry Run Detection Feature

The LD sensor detects (conductive) liquid*. The pump will run as long as the LD sensor is suspended in liquid. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Abyss Solar Charger #1 to shut-off the pump. As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Abyss Solar Charger #1 to turn-on the pump. This pumping cycle continues automatically.

 

Option #2: Tank Float Switch Feature

This feature prevents tank over-fill and provides control over the desired total volume of liquid that enters the tank. The tank float switch transmits a signal to the Abyss Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment). The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Abyss Solar Charger #1 to turn-on the pump again. This pumping cycle continues automatically.

 

Option #3: Multiple Settings Timer Feature

The Abyss Solar Charger #1 timer provides up to 19 pumping cycles within a 24 hour period, delivering total autonomous pump run times and control over pump run time duration. This pumping cycle continues automatically.

 

Option #4: Abyss Booster Feature

The Abyss Booster Feature automatically doubles the pump flow rate which is especially helpful when purging medium to higher yielding wells, vaults, and in surface water applications. The Abyss Booster incorporates Constant Voltage Boosting Technology (CVBT) providing the correct voltage to reach the pump motor for consistent flow rate.

 

Option #5: Incorporate all Autonomous Features

Incorporating the LD and Dry Run Detection Sensors, Tank Float Switch and Multiple Settings Timer features provides the ultimate experience in autonomous pump control available!

​

Absolute Pump Control ~ you're going to love the way you work!

Benefits:  

Proactive® Intelligent 80 Amp Solar Charger 

  • Ideal for off-the-grid projects

  • Ideal for remote sites

  • Designed for the Abyss® pump line series

  • Incorporated into the most economical, intuitive, and simple to use solar powered autonomous pump control on the market

  • Improves time management! Literally set the Proactive® 80 amp Solar Charger and autonomous settings with pump and forget it

  • Saves money by eliminating archaic, bulky, and expensive equipment

  • Reduces carbon footprints

Benefits:

Proactive® LD and Dry Run Sensor Autonomous Pump Control

  • Use of the LD with Dry Run autonomous pump control sensors manages pump operation so you don’t have to

  • Reliable LD Sensor runs the pump only when liquid is present* 

  • Same pump flow rate recognition through autonomous pumping cycles  

  • Flexibility to choose the autonomous options that will get the job done accurately, faster, and under budget

  • Additional and customized LD and Dry Run Sensor wire length is available upon request at time of order

  • User-friendly, one time simple setup

  • Look like a PRO when your clients see how much money you save them by deploying Abyss Solar Charger #1 with Proactive® Autonomous Pump Control Technologies

Benefits:

Proactive® Tank Float Switch Autonomous Pump Control 

  • Ideal pump management when transferring liquid to a tank

  • Prevents tank over-fill 

  • Provides control over the desired total volume of liquid that enters the tank 

  • Same pump flow rate recognition through autonomous pumping cycles

  • Provides peace of mind knowing that the tank float switch will mind the pumping operation so you don't have to

  • User-friendly, one time simple setup

Benefits:

Proactive® 38 Multiple Settings Timer Autonomous Pump Control 

  • Provides ultimate pump management!

  • Using the timer settings feature controls the pump run times and duration of pump run time

  • Offers up to 19 reliable pumping cycles within a 24 hour period

  • Gives you control over how long the pump will run for during each pumping cycle 

  • Proven to be most effective for autonomous pump control when coupled with Proactive® LD Sensor technology

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Controlled pumping cycles extends pump life

  • User-friendly, one time simple setup

Benefits:

Proactive® Abyss Booster

  • Ideal for short and long term groundwater purge and pump tests

  • Doubles the purge flow rate which doubles your time efficiency

  • Plug and Play Booster - No setup required

  • Economical purging solution

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Save money! Eliminate archaic, bulky & expensive equipment

  • Look like a PRO when your clients see how much money you save them by doing the job twice as fast with Proactive® Pump Boosting Technology

Features: 

Proactive® Intelligent 80 Amp Solar Charger 

  • Proactive® Solar charger handles up to 80 amps input allowing for a large solar panel array

  • Intelligent Proactive® 80 Amp Solar Charger identifies and auto adjusts to 12 or 24 volt solar panels (this means you do not need a 24 to 12 volt step down unit!)

  • Easy-to-read LCD Display

  • User-friendly operation interface

  • State-of-the-art Pulse Width Modulation (PWM) incorporated, providing reliable, effective, and consistent charging

  • Intelligent battery reverse discharge protection

  • Intelligent battery reverse polarity protection 

  • Low Voltage Disconnect (LVD) battery protection 

  • Intelligent overload feature with short circuit protection

  • Intelligent automatic temperature compensation

  • Provides consistent amp and 12 volt DC output to the pump for consistent flow rate

  • User-friendly, one time simple setup 

  • Incorporated into weatherproof enclosure

Features:

Proactive® LD and Dry Run Sensor Autonomous Pump Control 

  • Provides autonomous pump management

  • The pump will run as long as the LD sensor is suspended in liquid*. When liquid draws down below the LD sensor, the dry run sensor transmits a signal to the Abyss Solar Charger #1 to shut-off the pump

  • As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Abyss Solar Charger #1 to turn-on the pump

  • This pumping cycle continues automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Purposefully sleek and narrow LD and Dry Run Sensor wires and probes designed to accommodate both the pump and sensors in 2” and larger diameters wells

  • LD Sensor probes also serve as wire weights

  • User-friendly, one time simple setup

Features:

Proactive® Tank Float Switch Autonomous Pump Control

  • Provides tank overfill protection

  • The tank float switch transmits a signal to the Abyss Solar Charger #1 to shut-off the pump when it detects the full or desired set point (assigned during tank float switch deployment) 

  • The pump remains off until the tank reservoir drops to tank float switch set point, triggering the tank float switch to transmit a signal to the Abyss Solar Charger #1 to turn-on the pump 

  • The pumping cycle continues automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology

  • Can be deployed in tank or vault long distances from power supply with added wire. Additional wire is available (sold by the foot upon time of order)

  • Tank float switch comes with 3 feet of wire. Additional wire is available (sold by the foot upon time of order)

  • User-friendly, one time simple setup

Features:

Proactive® 38 Multiple Settings Timer Autonomous Pump Control 

  • Sophisticated yet easy to program timer provides 19 reliable pumping cycle settings within a 24 hour period

  • Delivers control over the duration of pump run time per pumping cycle

  • Pumping cycles occur automatically

  • Same pump flow rate recognition through each autonomous pumping cycle

  • Controlled pumping cycles may extend pump life

  • Using the multiple settings timer feature may reduce well stress 

  • Increased effectiveness when used in conjunction with LD and Dry Run Sensor technology

  • Easy to read LCD lit display

  • User-friendly, one time simple setup

Features:

Proactive® Abyss Booster

  • The internal Booster doubles the purge rate for the Abyss® or Abyss® Slimline pumps

  • Constant Voltage Boosting Technology (CVBT) is incorporated into all Proactive® power boosters providing the correct voltage to reach the pump motor for consistent flow rate

  • Low Voltage Disconnect (LVD) is incorporated into all Proactive® power boosters. LVD protects the battery from going into critical level discharge 

  • The booster recognizes the same pump flow rate recognition through each autonomous pumping cycle

Abyss Solar Charger #1 comes with:

  • Weatherproof enclosure provides long life and protection to the components

  • 80 amp Solar Charger

  • Built-in Proactive® Abyss Booster

  • Built-in Multiple Settings Timer

  • Built-in 30 amp breakers

  • Liquid Detection Sensor and Dry Run Sensor probes come with:

         â—‹ 300 feet of wire per sensor spooled onto reel for: Abyss® Series Pump Line      

  • Tank Float Switch comes with 3 feet of wire (additional wire can be purchased upon request at time of order)

  • Tamper-Proof lock for peace-of-mind

  • Mounting Brackets 

  • Warranty: Manufacturer 6 months parts and labor warranty

Specifications:

 

DC VOLT RECOMMENDATION:              12-24V

MAXIMUM AMP OUTPUT:                    25 AMPS

MAXIMUM AMP INPUT:                       80 AMPS

DEPTH MEASUREMENT:                        8"

WIDTH MEASUREMENT:                       17" 

HEIGHT MEASUREMENT:                       21"

WEIGHT:                                              19 POUNDS   

INTERNAL FUSE:                                   25 AMP

BREAKERS:                                           30 AMP 

ENCLOSURE RATED:                              WEATHERPROOF

​

Note: Product dimensions are inclusive of the Abyss Solar Charger #1 NOT inclusive of the sensors, reels, or tank float switch. 

​

* Liquid must contain minerals in order to use the LD sensor 

Abyss Solar Charger #1
Requires one of the following pumps:

12 Volt Abyss®

 (Lifts 220 Feet / 67 Meters DTW)

(For 4" schedule 40 well or larger)

12 Volt Abyss Plastic Pump
bottom of page